Elektrische Standaarden

GenRad 1482 Series Inductie Standaard

• Stable within ±0.01% per year
• 18 Models values from 1 µH to 10 H
• Low, known temperature coefficient
• 3 year warranty included

Ohm Labs Multiple High Resistance Standard – MHS

• 1 MegaOhm to 1 TeraOhm
• Fully guarded
• High immunity from ambient temperature changes
• Transportable

IET GenRad 1620-A Capaciteitsbrug

• ^–10⁵pF to 11.1 µF, 2-or 3-terminal
• frequency range 20 Hz -20 kHz (or higher)
• 01% accuracy, 1-ppm resolution
• reads dissipation factor or conductance
• combines GenRad 1615 Capacitance Bridge, 1232-A Null Detector & 1311-A Oscillator

GenRad 1621 Capacitance Bridge van IET

• Range 10^-7 pF to 10 µF, 12-digit readout
• 10-ppm basic accuracy
• frequency range 10 Hz – 100 kHz
• Combines GenRad 1616 Capacitance Bridge, 1238-A Null Detector & 1316 Oscillator
• 3-terminal measurements with 2- or 3-terminal connections
• Comparison measurements

IET GenRad 1422 Series Variable Air Capicators

• Range as low as 0.002 pF and as high as 1150 pF (Depending on Model)
• Stability: better than 0.02% full scale per year
• Settable to 40 ppm
• Low temperature coefficient, low losses

IET GenRad 1403 Series High Frequence Standard Capicator

• Available in values from 0.001 pF – 1000 pF
• Excellent Performance at high frequencies

IET GenRad 1409 Series Standard Capacitors

• Values 0.001 µF (100 nF)  to 1000 µF
• Stability as good as ±0.01 %/year
• Two-to-five terminal configuration, depending on model

IET SCA Series Capacitance Standard

• Values from 1 pF to 10,000 µF in any custom value available
• Stability as good as ±0.01 %/year
• Two-to-five terminal configuration, depending on model
• Excellent TC: as low as 10 ppm/°C

IET GenRad 1404 serie Primaire standaard condensatoren

• New 5 nF and 10 nF Standards Available
• A national laboratory standard
• For calibrating working standards
• Standard for dissipation factor
• Available in 10 pF, 100 pF,1000 pF, 10,000 pF

Ohm Labs SmartResistor and Automated Resistance Standard

• A “Resistance Lab in a box”
• 8 Resistance values typical from 1Ω to 10MΩ
• Customer can specify any eight resistance values
• Constant teemperature bath with nominal setting at 25∘C with a 10mK stability

IET SR Serie Primaire Weerstanden

• Highest accuracy (1 ppm/yr) and stability (±0.5 ppm/yr typical) of any resistance standard
• Lowest temperature coefficients (< 0.1 ppm/ºC)
• Available in 3 models: 100Ω, 1000 Ω, 10,000Ω.
• Has remained the foremost resistance standard, with no equivalent, for over 35 years
• The primary standard of National Metrology Labs throughout the world
• 5 Year Warranty Included

Ohm-Labs 100 Serie Weerstandsstandaarden

• Resistance from 1 Ω to 10 MΩ
• Table over time
• Low Temperature Coefficients
• Immune from humidity & pressure changes
• For use in air at 23 °C
• Available from 1 Ω to 10 MΩ

Ohm-Labs 200 Series Referentie Weerstand Standaarden

• Reference Resistance Standards
• From 0,1Ω to 10MΩ
• Initial 12 month stability from <2 ppm
• Low Temperature Coefficients
• High stability
• Immunity from environmental effects
• May be used in oil or air

Ohm Labs 100-0 Nul Ohm standaard

• Balanced Tetrajunction design
• A true Zero-Ohm resistor
• Ideal for meter calibration

Ohm-Labs 1000 Serie Lage Weerstandsstandaarden

• High stability
• High immunity from environmental effects
• For use in air – no oil bath needed
• 1Ω at 1 A to 10 μΩ AT 300 A
• Improved specification

Ohm Labs 2000 lage weerstandstandaarden

• Reference Resistance Standard
• Excellent stability
• 1 OHM to 10 MICRO-OHMS
• From 10µΩ to 1Ω
• Max current up to 1000A